PAIRING METHOD:

Each smart lighting switch has main chipset and memory, it can read different RF signals and distinguish which function to do. Each switch can store 20 different codes. For the switch, there are 4 different pairing methods.

Single ON/OFF: Turn off the lamp first. Press the button on the switch which you will pair for 5 seconds. Then the lamp turns ON, press the button on remote controller within 5 seconds. The lamp will flicker twice. The Single ON/OFF pairing is finished. Press the button again to quit pairing status.

ALL ON: Turn off the lamp first. Press the button on the switch which you will pair for 15 seconds. Then the lamp turns “ON-OFF-ON”, press the "ON" button on remote controller within 5 seconds. The lamp will flicker twice. The ALL ON pairing is finished. Press the button again to quit pairing status.

ALL OFF: Turn off the lamp first. Press the button on the switch which you will pair for 10 seconds. Then the lamp turns “ON-OFF”, press the "OFF" button on remote controller within 5 seconds. The lamp will flicker twice. The OFF pairing is finished. Press the button to quit pairing status.

Delete: Turn off the lamp first. Press the button on the switch which you will delete for 20 seconds. Then the lamp turns “ON-OFF-ON-OFF”. All the paired pad or remotes will be deleted.

Note:

(1) Single ON/OFF means using one button on remote controller to turn on and off the light. Press the button, it is on, press the button again, it is off.

(2) ALL ON means the control button only can turn on the light. ALL OFF means the control button only can turn off the light. In the mode, it should be use two button to control the light ON or OFF. When the smart switch is paired by tablet pad, please make pairing ALL ON for on function and ALL OFF for off function.

(3) Each gang can pair up to 20 different codes, if make the 21^st pairing, the 1^st one will be covered.